Vaporbrothers All-Glass Whips

The original Vaporbrothers whip: the handpiece is one piece of clear glass, with the stainless steel screen held in a groove inside the glass. Simple, durable, and economical. Choose Hands-Free or Hands-On above, then your model.

Hands-Free or Hands-On

• Hands-Free: a ground glass 16mm taper attaches to the matching tapered heater tip of Hands-Free Vaporbrothers vaporizers and stays in place while you inhale.
• Hands-On (formerly "Standard"): the simple flared tip is held to the heating element during the draw, then pulled away between hits. Tilt or rotate the whip to redirect the airflow and spread the heat evenly through the bowl. The glass stays cooler, you can check your herbs between hits, and without a ground joint, the glass is more durable. Works with all Vaporbrothers vaporizers, but it does not stay attached to the heater.

Not sure which you have? See Hands-Free vs. Hands-On.

Mini Thin (Hands-On only)

A smaller inside diameter, so your herbs stack taller instead of spreading out on the screen. That gives full hits from small amounts, and the thinner wall cools quicker.

Every All-Glass whip

• Smooth, fully fused glass with no sharp edges or weak spots
• Unrestricted airflow for the best inhale possible from a box vaporizer
• Stainless steel screen that resists poking and prodding, heat treated by us to remove the taste of metal
• High temp silicone hose, about 3.5 feet
• Teardrop shape glass mouthpiece (replacements here)
• All glass inspected for defects and free of internal stresses

Screens

For best performance use only Vaporbrothers replacement screens: .75" screens for the regular All-Glass whips, .625" screens for the Mini Thin. Click the diagram for our rescreening instructions, or watch this video from our most experienced whip screener.

Our glass

Every piece is laboratory grade borosilicate glass, kept to a uniform wall thickness. Many competitor whips use thin, low tolerance glass that wobbles over the heater and cracks.

The 16mm Vaporbrothers tip

We use a 16mm whip tip because it gives a better vaporizing experience and gets more out of your herb. The 19mm off the shelf size used by clones and competitors is easier to break, uses more herb, and is more prone to spilling it.

How to tell if you have a Hands-Free model

Look at the whip you have now. A red "HOT" or "CAUTION" emblem and a frosted, ground glass tip that attaches to the heating element mean you have a Hands-Free model.

Fits Vaporbrothers only

These All-Glass whips fit genuine Vaporbrothers vaporizers only. They are not compatible with clones, including Easy Vape Digital, VaporWarez, VaporBox, VaporCannon, VaporDoc, Pure Vaporizer, Got Vape Aroma Classic Vaporizer, the Vapor King Vaporizer, Pitara, and others not listed here.

Cleaning tip: boiling water (for careful users only)

Bring a small pot of water to a boil. Leave the whip fully assembled. Dip the bowl end of the whip into the boiling water and draw water up into the whip by inhaling slowly through the hose. Do not scald yourself. The residue should come loose when you blow the water out of the whip, down the drain or back into the pot. Vaporizing residue is not as stuck to the glass as smoking residue. If there are burned marks, try scraping them with a tool. If the pot is hard to clean with dish soap, spray cooking oil all over it, let it sit a few minutes, then wash as normal.

Cleaning tip: alcohol soak (glass only)

Fill a plastic bag about 1/4 full of rubbing alcohol and add a spoonful of salt. Leave the screen in the whip handpiece. Remove the glass parts from the hose and drop them in the bag. Shake the bag to cover the glass and let it sit a few minutes, then rinse under hot water. Repeat a time or two, or leave overnight, if needed. Use a cloth with alcohol to clean the outside of the glass. Never use alcohol on the hose.